Changing a programme while it
is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If an attempt is made to change a
selection,
Option not possible
will
appear in the display.
It is still possible to select or deselect
the
Anti-crease
and
Buzzer
extra
options.
You will need to cancel the current
programme before you can select a
new one.
Cancelling a programme
^ Press the
Start/Stop
button.
The "Stopped" option
Cancel
programme
will appear in the display.
^ Confirm by pressing the right hand
Menu
button under OK.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the
Start/Stop
button
during the cooling down phase and
confirm by pressing the right hand
Menu
button under OK,
Finished
will
appear in the display.
^
Switch the dryer off and then on
again.
^
You can now select a different
programme.
Note: A programme can also be
interrupted by turning the programme
selector to
Stop
.
Interrupting a programme
^
Switch the dryer off.
To continue drying
^
Switch the dryer on.
The programme will continue, as long
as the cooling down phase has not
been reached.
Adding or removing laundry
after a programme has started
^ Press the
Door
button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^
Add or remove items as required.
^
Close the door.
^
Press the
Start/Stop
button.
Note
The time remaining shown in the
display may now vary from the actual
drying time.
Changing the programme sequence
25
To Next Page
Loading...
Need help?
General
