4. Remove the laundry
30
End of programme/Anti-crease
action
End of programme: lights up in the
time display and the Start/Add laundry
sensor control goes out.
The end of the programme is followed
by the anti-crease phase, which will run
for up to 2hours. The Woollens hand-
care programme does not support the
anti-crease function.
See “Programmable functions“,
“Anti-crease”.
Unloading the drum
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Reach under the door grip and pull
the door open.
Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Always remove all items from the
drum.
Turn the programme selector to the
position.
Remove the fluff from the 2 fluff filters
in the door opening: see “Cleaning
and care - Fluff filters”.
Shut the door with a gentle swing.
Empty the condensed water con-
tainer.
To Next Page
Loading...
Need help?
General
