Operating the tumble dryer
18
Control panel
a
sensor control (drying level)
For selecting the drying level
b
PerfectDryindicator
flashes after the programme has
started and switches off when the
running time is displayed. PerfectDry
measures the residual moisture of
the laundry. In programmes with se-
lectable drying levels, PerfectDry
dries the laundry precisely, although
the result is also influenced by the
calcium content of the water.
lights up towards the end of the
programme once the selected drying
level has been reached, except in
the case of the Woollens handcare,
Warm air/DryFresh programmes.
c
sensor control (Gentletumble)
For protecting temperature-sensitive
fabrics
d
Sensor control (Delay start or
time)
For activating the Delay start
function. With the Delay start
function, you can delay the
start of the programme.
lights up. The start of the pro-
gramme can be delayed from
30minutes up to a maximum
of 24hours. This allows you to
make use of night-time eco-
nomy electricity rates, for ex-
ample.
When you select the Warm air/
DryFresh programme, you can
select the programme running
time (time). This programme
cannot be used with the Delay
start function.
e
Indicator lights
(These light up when necessary.)
Empty the condensate con-
tainer.
Clean the fluff and plinth filters.
To Next Page
Loading...
Need help?
General
