Cleaning the lint filters
,
A clogged filter is a fire hazard!
The lint filter must be cleaned after
every program.
^ Open the door and remove the lint
filter, 1, by gently lifting it upwards.
^
Wipe the lint off the filter with your
hand (do not use sharp objects).
^ Any lint remaining in the hollow part
of the door can be removed through
the gap at the bottom with a dust
brush or vacuum.
^ Clean the gasket, 2, with a damp
cloth.
^ Return the lint filter and close the
door.
The lint filter can be rinsed with hot
water if necessary. The filter must be
dried thoroughly before being
returned to the dryer door.
Dryer care
14
To Next Page
Loading...
Need help?
General
