Cleaning the exterior and the
control panel
,
To reduce the risk of electric
shock, disconnect the dryer from the
power supply by shutting off the
power main, tripping the circuit
breaker or unplugging the power
cord before performing
maintenance.
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dryer. They
will damage the surface.
^ The exterior and the control panel
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry.
Cleaning the drum
^
The stainless steel surfaces of the
drum can be cleaned using a
non-abrasive stainless steel cleaner.
^
Wipe clean with a soft cloth.
Dryer care
16
To Next Page
Loading...
Need help?
General
