EasyManuals Logo
Home>Miele>Dryer>TWC220WP

Miele TWC220WP User Manual

Miele TWC220WP
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
11946850-00
Installation
*INSTALLATION*
External condensed water out-
let
Note
When drying is in progress, con-
densed water is pumped into the con-
densed water container through the
drain hose which is located at the
back of the dryer.
The condensed water can also be ex-
ternally drained away via the drain hose
at the back of the dryer. This means
that the condensed water container no
longer has to be emptied.
Drain hose length: 1.49m
Max. delivery head: 1.00m
Max. drain hose length: 4.00m
Drainage accessories
- Supplied: Adapter (b), Hose clip (c),
Hose holder (e);
- Available to purchase: “Non-return
valve” kit for connection to an ex-
ternal water connection. Non-return
valve (d), Hose extension (a) and
Hose clips (c) are supplied.
Installation conditions requiring a
non-return valve
Danger of condensed water
back-flow.
Water could flow back into the
tumble dryer or be drawn into it.
Back-flow water could damage the
tumble dryer and also the room in
which it is located.
The non-return valve should be used
if the end of the hose is immersed in
water, or if other water connections
are installed.
Maximum delivery head with non-return
valve fitted: 1.00m
Installation conditions requiring the fit-
ting of a non-return valve:
- Drainage into a sink or floor gully
where the end of the hose is im-
mersed in water.
- Connection to a sink drain outlet.
- Connection to a drainage system
already in use by another appliance,
e.g. a dishwasher or washing ma-
chine.
If the non-return valve is incorrectly
fitted the appliance will not drain.
The non-return valve has to be fitted
with the arrow on it pointing in the
direction of flow.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele TWC220WP and is the answer not in the manual?

Miele TWC220WP Specifications

General IconGeneral
Door hingeLeft
Door styleOpaque door
Cord length2 m
Control typeRotary
Loading typeFront-load
Drying systemHeat pump
Product colorWhite
Built-in displayYes
Reversible doorsNo
Appliance placementFreestanding
Delay start (max)24 h
Current10 A
Heat sourceElectric
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy consumption1.55 kWh
Energy efficiency scaleA+++ to D
Annual energy consumption192 kWh
Cycle time165 min
Noise level66 dB
Drying classA
Drum capacity8 kg
Refrigerating mediumR290
Number of drying programs12
Refrigerating medium weight110 g
Weight and Dimensions IconWeight and Dimensions
Depth655 mm
Width596 mm
Height850 mm
Weight52000 g
Depth with door open1077 mm

Related product manuals