Water plus
The water level increases in "soak",
pre-wash", "main wash" and / or
"rinses", and / or an extra rinse can
be carried out.
You can choose between four options
for the "Water plus" button.
The options can be called up through
one of the programmable functions,
(see Water plus system in the Section
on programmable functions).
Switching off the additional options
If an additional option is switched on
(and the indicator light in the button is
lit up), the option can be switched off
by pressing the button. The indicator
light goes out.
Spin
A final spin is carried at the end of
each of the basic programmes, if a
spin speed had been selected.
"Without final spin"
Interim rinse and spin is carried out in
the relevant programmes.
Washing is not spun after the final
rinse, but the water is drained away,
and the machine goes straight into the
anti-crease stage.
"Rinse hold"
Interim rinse and spin is carried out dur-
ing the programme cycle.
The washing remains suspended in
water after the final rinse.
This helps to reduce the possibility of
creasing if the washing is left for some
time before being taken out of the ma-
chine.
To continue the programme:
Select the required spin speed with the
Spin button.
The maximum spin speed is automati-
cally limited according to the basic
wash programme chosen, (See Pro-
gramme Survey section).
Additional options
28
To Next Page
Loading...
Need help?
General
