3. To activate or deactivate a pro-
grammable function.
For the programmable functions
A,
C, E, F, G
7 Pressing the “Start” button once will
activate the programmable function.
The "Rinses" light comes on in the Se-
quence display.
When the "Start" button is pressed
again the "Rinses" indicator light goes
out and the programmable function is
deactivated.
For the programmable function
B
The "Rinses" indicator light comes on.
7 By pressing the “Start” button a
various number of times you can se-
lect different options. To confirm se-
lection an indicator light comes on
as follows:
– "Rinse" indicator light
= Option 1
– "Rinse hold" indicator light
= Option 2
– "Drain" indicator light
= Option 3
– "Final spin" indicator light
= Option 4
For the programmable function
D
The "Rinses" indicator light comes on.
7 By pressing the “Start” button a
various number of times you can se-
lect different soak times. To confirm
the soak time selected an indicator
light comes on as follows:
– "Rinse" indicator light
= 2 hours
– "Rinse hold" indicator light
= 1 1/2 hours
– "Drain" indicator light
= 1 hour
– "Final spin" indicator light
= 30 mins.
4. Storing the programmable func-
tion in memory
8 Switch the machine off with the “I-
ON/0-OFF” button.
Now you can start the wash pro-
gramme that you want.
The programmable function is now
stored in memory and is available at
any time, until it is deleted.
Programmable functions
33
To Next Page
Loading...
Need help?
General
