28
15. Important Safety Guidelines
- Initializing
After connecting the VBar, it initializes. This can take a few
seconds. The completion of the initialization is indicated by a
twitch of the swashplate. The heli must not be moved during
the intialization process. You must have seen this brief twitch
of the swashplate before you start operating the helicotper in
flight.
- General Guidelines
A radio-controlled model helicopter is not a toy. Absolutely every step
in connection with building and operating the helicopter must be carried
out with utmost care. It is essential that you are aware of the function
of every step which you are performing. If there is the slightest unclarity
about what you are doing, you must stop immediately, you must
have that question completely resolved first. You must also stop
building or operating the model, if you find that the manual is unclear
to you.
Be aware that any improper handling can cause the helicopter to
crash. Such crashes may lead to total loss of the helicopter and it
can severely damage things or persons. Any model helicopter, and
in particular a model helicopter with an installed VBar System, may
not be operated in such a way that any things or persons are in
danger of being damaged. The VBar System may be installed and
operated only in helicopter systems, which are designed to be operated
with a flybarless rotor head.
- Settings
The VBar is a system placed between the receiver and the controlling
units of the helicopter. Thus the VBar is one of the actively controlling
elements of the helicopter.
To Next Page
Loading...
Need help?
General
