MikroTik CCR2004-16G-2S+ Manual

CCR2004-16G-2S+
CCR2004-16G-2S+
Safety Warnings
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for
preventing accidents. The installer should be familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making
sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify
the device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate
at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take
adequate measures
Electric shock hazard. This equipment is to be serviced by trained personnel only
Quick start
Connect with your computer to the device;
Download the configuration tool ;https://mt.lv/winbox
Open the tab and connect to the device using MAC address; Neighbors 
Theuser name: , by default there is no password; admin
To dupdate the device to the latest software version ownload the latest RouterOS software from ;https://mikrotik.com/download
Choose ARM64 packages, and save them to your computer;
Return to the WinBox and upload downloaded packages;
Restart the device.
Powering
The device has dual integrated power supply units AC 100-240V with standard IEC compatible sockets with Maximum power consumption of 48 W.

MikroTik CCR2004-16G-2S+ Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Flash memory	128 MB
Certification	CE, EAC, ROHS
Internal memory	4096 MB
Processor frequency	1700 MHz
Internal memory type	DDR4
Processor manufacturer	Annapurna Labs
Mean time between failures (MTBF)	200000 h
Operating temperature (T-T)	-20 - 60 °C
Input current	0.9 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	48 W
SFP module slots quantity	2
Ethernet LAN (RJ-45) ports	16
Sustainability certificates	RoHS
Product color	White
Rack capacity	1U
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	44 mm
Width	443 mm
Height	210 mm