1.
2.
3.
4.
5.
6.
7.
8.
9.
netPower 15FR
netPower 15FR
The NetPower is a weatherproof switch with the capability of using backup PoE from connected devices.
Quickstart
Please follow these quick steps to set up your device:
Open the bottom lid (see " ").netPower 15FR#Bottom Lid
Connect all served devices to Ethernet ports.
Connect the device to the power source (see " ").netPower 15FR#Powering
Open network connections on your PC.
Set the IP address of your computer to 192.168.88.4/24.
The Configuration has to be done through the web browser or WinBox configuration tool .https://mt.lv/winbox
Once connected to the network, open in your web browser to start configuration, user name: a and there is no https://192.168.88.1
dmin
password by default.
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability. Must have an active Internet connection configured.
Set a secure password.
Expansion slots and ports
DC power connector 18 – 57 V.
LED indicating a power state of the device.
Reset button.
Fast Ethernet 100Mbit/s, 15 - Ethernet ports, accepting PoE In.
Fast Ethernet 100Mbit/s, One - Ethernet port, delivering PoE out.
LED indicator of PoE out Ethernet port.
Two - 1G SFP ports.
LED Indicating the activity of SFP port.
LED Indicating the speed of SFP port.
Configuration
To Next Page
Need help?
General
