MikroTik Woobm-USB User Manual

Woobm-USB
The Woobm is a WiFi-to-serial bridge. This device enables wireless access to RouterBOARD devices which have a USB port but do not have wireless
interfaces. The device operates in 2GHz 802.11b/g/n wireless mode and supports both client and access point modes, which can be protected with a WPA
wireless password.
Powering
The device accepts power from the USB port of the RouterBOARD device.
First startup
Connect your Woobm-USB to the USB port, open a wireless network with SSID: WoobmAP will be created. Connect to device and open device IP address
in a web browser.
A device running RouterOS will automatically mount as a serial USB device and provide access after successful login.
WEB interface
WEB interface allows access to the serial port from devices equipped with an 802.11b/g/n 2.4GHz wireless module.
Web interface default page is "Home" From the home page, it is possible to connect and configure RouterOS neighbor devices (MikroTik devices in the
same network) Press on a device IP address to establish a connection:
Default Woobm-USB IP is192.168.4.1

MikroTik Woobm-USB Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Internal	No
Product color	White
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bandwidth (first)	2.4 GHz
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	- Mbit/s
Gain	1.5 dBi
Quantity	1
Output voltage	5 V
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	19 mm
Width	55 mm
Height	8 mm