Release the button after LED is no longer flashing (~20 seconds) to cause the device to look for
Netinstall servers (required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button
is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Operating system support
The device supports RouterOS software with version 7.4.1 at or above which is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
Notice
Datasheet for any device is available on the official manufacturer website.
For some models, check the user and wireless passwords on the sticker.
The Frequency band 5.470-5.725 GHz isn’t allowed for commercial use.
Please make sure the device has a locking package (firmware version from the manufacturer) which is
required to be applied to the end-user equipment to prevent the end-user from reconfiguration. The
product will be marked with country code “-EG” - C52iG-5HaxD2HaxD-TC-EG.
For Outdoor Usage: End-user requires approval/license from the NTRA.
Firmware for Egypt Regulatory have their wireless frequency range limited to 2.400 – 2.4835 GHz, the
TX power is limited to 20dBm (EIRP).
Firmware for Egypt Regulatory have their wireless frequency range limited to 5.150 – 5.250 GHz, the
TX power is limited to 23dBm (EIRP).
Firmware for Egypt Regulatory have their wireless frequency range limited to 5.250 – 5.350 GHz, the
TX power is limited to 20dBm (EIRP).
This device needs to be upgraded to the latest version to ensure compliance with local authority
regulations! It is the end users responsibility to follow local country regulations, including operation
within legal frequency channels, output power, cabling requirements, and Dynamic Frequency
Selection (DFS) requirements.
All MikroTik radio devices must be professionally installed.
To avoid pollution of the environment, please separate the device from household waste and dispose of
it in a safe manner, such as at designated waste disposal sites. Familiarize yourself with the procedures
for the proper transportation of the equipment to the designated disposal sites in your area.
To Next Page
Loading...
Need help?
General
