MikroTik R11e-LTE User Manual

Mounting
1. Slide the included metallic mounting rings into the two slots on the back of the antenna dish.
2. Attach the unit to a pole, with the Ethernet port pointing downward.
3. Use a PH2 screwdriver to tighten the rings.
4. Fix the Ethernet cable to the pole using zip ties, less than one meter from the unit, to avoid the cable being
pulled out of the port.
5. Check mounting angle and positioning.
6. Optional: if required, before mounting the unit, you can insert the included 5-degree adjustment adapter
into the top or bottom slot where the mounting ring is inserted. This will create an additional upward or
downward angle when the unit is tightened to a vertical pole.
7. Insert 5-degree angle adapter to one of the slots and remount the unit.
When mounting outdoors, please ensure that any cable openings are directed downwards. Use POE injector and
proper grounding, this device has specially designed grounding connector under the port cover. Recommended
using shielded Cat5/6 cable. The IP rating scale for this device is IP54.
Warning! This equipment should be installed and operated with a minimum distance of 120 cm between the device
and your body. Operation of this equipment in the residential environment could cause radio interference.
Configuration
Once logged in, we recommend clicking the “Check for updates” button in the QuickSet menu, as updating your
RouterOS software to the latest version ensures the best performance and stability. For wireless models, please
make sure you have selected the country where the device will be used, to conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest
starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case IP connection is not available,
the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side
(all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device from the network, see a section Reset button.
See mikrotik.com/products for the latest version of this document. Document #49088 Modified on: 02.JUL.2019

MikroTik R11e-LTE Specifications

General

Interface	-
Connectivity technology	Wireless
Internal	Yes
Certification	CE
Product color	Gold, Green
Maximum data transfer rate	150 Mbit/s
Supported network protocols	IPv4, IPv6
Operating temperature (T-T)	-30 - 70 °C
Quantity	1
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	30 mm
Width	51 mm
Height	5 mm