MikroTik R11e-LTE User Manual

Reset button
The reset button has three functions:
• Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers
(required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
The device includes a grounding connection behind the Ethernet port door, which you should connect to the
grounding installation of the tower or building where the device will be used. This is to substantially reduce the risk
of ESD and lightning damage.
Mode button
The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS
script. You can also disable this button. The mode button can be configured in RouterOS menu /system routerboard
mode-button.
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/lhg_lte_kit
RBLHGR&R11e-LTE includes LTE modem that supports International LTE bands 1, 2, 3, 7, 8, 20, 38 and 40.
For the US version:
https://mikrotik.com/product/lhg_lte_kit_us
RBLHGR&R11e-LTE-US includes LTE modem that supports LTE bands 2, 4, 5 and 12, mostly used by mobile
operators in United States, Canada and Latin America.
Operating system support
The device supports RouterOS software version 6. The specific factory installed version number is indicated in the
RouterOS menu /system resource. Other operating systems have not been tested.
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A
device, operating it near residential radio equipment could cause radio interference.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for
your MikroTik home access point.
See mikrotik.com/products for the latest version of this document. Document #49088 Modified on: 02.JUL.2019

MikroTik R11e-LTE Specifications

General

Interface	-
Connectivity technology	Wireless
Internal	Yes
Certification	CE
Product color	Gold, Green
Maximum data transfer rate	150 Mbit/s
Supported network protocols	IPv4, IPv6
Operating temperature (T-T)	-30 - 70 °C
Quantity	1
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	30 mm
Width	51 mm
Height	5 mm