MikroTik RB260GSP User Manual

Expansion slots and ports
• 5x Gbit Ethernet ports.
• One 1g SFP port.
Reset button
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
• Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
• Release the button when the LED turns solid green to clear all configuration and defaults.
• Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers
(required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
• RB260GS - EU Switching Power Supply DC ⎓12 V, 1 A, 12 W, Level VI, cable:1.5 m.
• RB260GSP - Power adapter 24 V DC 2.5 A 60 W 80% VI 121x54x33 cable 1.2 m plug 2.1 mm.⎓
• RB260GSP - EU/US power cord, D03+QT3 H05VV-F 3x0.75 mm2 1.83 m RoHS.
Please visit wiki pages for MikroTik SFP module compatibility table:
https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
Specifications
For more information about this product, specification and pictures please visit our web page:
RB260GS
https://mikrotik.com/product/RB260GS
RB260GSP
https://mikrotik.com/product/RB260GSP
Operating system support
The device supports SwOS software version 2.9. The specific factory installed version number is indicated in the
system menu /system resource. Other operating systems have not been tested.
Each RouterBOARD switch series have their own firmware which cannot be installed on other series models! New
RB260GS (CSS106-5G-1S), new RB260GSP(CSS106-1G-4P-1S) supports SwOS v2.0 and newer. When
upgrading the device, it will first load primary firmware and then make an upgrade. In case a wrong firmware file is
chosen, the device will continue to operate with primary firmware and you will be able to choose the correct file.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for
your MikroTik home access point.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

MikroTik RB260GSP Specifications

General

Switch type	Managed
Switch layer	-
Power connector	DC-in jack
SFP module slots quantity	1
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	5
10G support	No
MAC address table	- entries
Product color	White
LED indicators	Yes
Input voltage	8 - 30 V
Power consumption (typical)	6 W
Operating temperature (T-T)	-25 - 65 °C

Weight and Dimensions

Depth	139 mm
Width	113 mm
Height	28 mm
Weight	212 g