OM-235 589 Page 7
3-3. Installing Optional Magnifying Lens
1 Optional Magnifying Lens
Starting at the top, slide magnifying
lens into the helmet retaining brack-
ets. Align the magnifying lens with
the auto-darkening lens assembly.
Reverse procedure to remove
magnifying lens.
To prevent lens fogging, install
flat side of magnifying lens to-
ward auto-darkening lens.
1
SECTION 4 − MAINTENANCE
NOTICE − Never use solvents or abrasive cleaning detergents.
The helmet requires little maintenance. However, for best performance clean after each use. Using
a soft cloth dampened with a mild soap and water solution, wipe the cover lenses clean. Allow to air
dry. Occasionally, the filter lens should be cleaned by gently wiping with a soft, dry cloth.
To Next Page
Loading...
Need help?
General
