Mimosa B11 User Manual

B11 User Guide
Mimosa Networks Help Site Management
Copyright © 2015 Mimosa Page 45
Network Interfaces
The Network Interfaces panel contains controls for changing data port status and speed.
B11
Ethernet Port - Set the Ethernet port transfer rate or allow it to be automatically determined. Manually
●
selectable options are 10, 100, or 1000BaseT at either full or half duplex. Note that Auto or 1000BaseT/Full is
recommended so that the Ethernet port does not create a bottleneck.
Fiber Port - Enable this option to route all data through this port with optical fiber and a small form-factor
●
pluggable (SFP) media adapter. Note that when using the Fiber Port, the Ethernet cable must remain connected
to the Ethernet Port to supply power.

Mimosa B11 Specifications

General

Brand	Mimosa
Model	B11
Category	Wireless Access Point
Language	English