Minelab GPX 6000 Pocket Guide

Noise Cancel Procedure
If audio responses become erratic due to
EMI, initiate the Noise Cancel process to
automatically select a quieter detecting
channel.
START 
1. Hold the coil 100 mm (4
in) above the ground.
100 mm (4")
2. Press the
Noise Cancel button.
3. Wait for confirmation
tone (approximately
5 seconds).
 Begin detecting.
 If the detector is still noisy when
using a mono coil, follow the
Double-D Coil Noise Cancel Procedure.
Return to Contents

Minelab GPX 6000 Specifications

General

Brand	Minelab
Model	GPX 6000
Category	Metal Detector
Language	English