Information is displayed in the Info Display of
the instrument cluster.
Information at a glance
Info Display
Repeatedly pressing the button
on the turn signal lever calls up
the following information in the
Info Display:
▷ Range.
▷ GREEN Info.
When GREEN Mode is activated.
▷ Average consumption, fuel.
▷ Current consumption, fuel.
▷ Average speed.
▷ Date.
▷ Engine temperature display.
▷ With equipment version with Head-up Dis‐
play and navigation:
Distance to destination.
When destination guidance is activated in
the navigation system.
▷ With equipment version with Head-up Dis‐
play and navigation:
Time of arrival.
When destination guidance is activated in
the navigation system.
▷ Speed Limit Info.
▷ Speed.
The unit of some information can be changed.
Setting units, refer to page 104.
Selecting information
You can select what information from the On‐
board Computer is to be displayed on the Info
Display of the instrument cluster.
Via the Central Information Display (CID):
1.
"Settings"
2. "Instrument cluster"
3. Select the desired information.
Settings are stored for the profile currently
used.
Information in detail
Range
Displays the estimated cruising range available
with the remaining fuel.
The range is calculated based on your driving
style over the last 20 miles/30 km.
GREEN info
The achieved range extension may be dis‐
played as a bonus range.
Average fuel consumption
This is calculated for the period while the en‐
gine is running.
The average fuel consumption is calculated for
the distance traveled since the last reset by the
Onboard Computer.
Average speed
Periods in which the vehicle is parked with the
engine manually stopped are not included in
the calculation of the average speed.
Resetting average values
Press and hold button on turn signal lever.
Seite 101
Displays
CONTROLS
101
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
