ter console. To do so, pull the retaining ring
upward at the rear edge.
2. Lift the sleeve. Unplug the cable connector,
if needed.
3. Using the screwdriver from the onboard ve‐
hicle tool kit, refer to page 233, press the
yellow release lever downward, see arrow.
4. Press the button on the front of the selector
lever and move the selector lever back
slightly.
Release the release lever.
5. Bring the selector lever into the desired po‐
sition.
For additional information, see the chapter on
tow-starting and towing.
Releasing the transmission lock
electronically: with a tap-operated
selector lever
General information
Electronically unlock the transmission lock to
maneuver vehicle from a danger area.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from roll‐
ing away.
Engaging selector lever position N
Unlocking is possible, if the starter can spin the
engine.
1. Press and hold down brake pedal.
2. Press the Start/Stop button. The starter
must audibly start.
3. Press the button on the selector lever, ar‐
row 1, and press and hold the selector lever
into selector lever position N, arrow N, until
selector lever position N is displayed in the
instrument cluster.
A Check Control message is displayed.
4. Release the selector lever.
5. Release brake, as soon as the starter stops.
6. Maneuver the vehicle from the danger area
and secure it against moving on its own.
For additional information, see the chapter on
tow-starting and towing.
Steptronic Sport transmission: Launch
Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry sur‐
rounding conditions.
Seite 89
Driving
CONTROLS
89
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
