Replacing the bulb
1. Turn the bulb counterclockwise, arrow 1,
and remove it, arrow 2.
2. Press the release, arrow 1, and pull off the
connector, arrow 2.
3. Insert the new bulb and attach the cover in
reverse order.
LED parking lights/LED fog lights/LED
daytime running lights
Follow the general instructions on lamps and
bulbs, refer to page 239.
Lights are implemented using LED technology.
In case of a malfunction, contact a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Turn signals/parking lights/roadside
parking lights/fog lights/and daytime
running lights
Access to the bulbs via the wheel housing
Follow the general instructions on lamps and
bulbs, refer to page 239.
1 Turn signal
2 Parking lights/roadside parking lights/fog
lights/and daytime running lights
Replacing the turn signal bulb
21-watt bulb, P 21 W, or PY 21 W
1.
Turn the wheel.
2. Remove cover 1.
To do this, turn the cover counterclockwise.
3. Remove the inside cover. To do this, turn
the cover counterclockwise.
4. Turn the bulb counterclockwise and re‐
move it.
5. Insert the new bulb and attach the covers
in reverse order.
Seite 241
Replacing components
MOBILITY
241
Online Edition for Part no. 01 40 2 964 459 - VI/15
To Next Page
Loading...
Need help?
General
