1. ame Of Parts:
2: Loading The Battery:
Two SR44 (G-13) or LR44 (A-76) or equivalent rated batteries are used in this camera.
1. The battery chamber cover can be opened by turning it anticlockwise with a coin, (fig 1).
2. Load the batteries according to the polarity indication sign in the battery chamber, (if loaded
incorrectly the LED in the viewfinder fails to work).
3. Turn the battery chamber cover clockwise to close and tighten.
Remove the batteries if the camera is not to be used for long periods of time.
The batteries should last for about a year under normal use conditions.
Keep the battery surface and battery contact points clean and free from moisture and dirt, if needed
wipe batteries clean with a soft cloth.
To Next Page
Loading...
Need help?
General
