SELF-TIMER OPERATION
-------------------------
To
use the self-timer, move the self-timer
l
eve
r located
on
the front
of
the camera body
90° to the left.
It
allows you a time delay
of
approximately
10
seconds after pressing the
shutter release
button.
You may also
get
any
intermediate time delay under
10
seconds
depending on the angle to which you set the
lever. You mav set the self
-tim
er either be-
fore or after the
shutter
is
cocked.
After setting the
se
lf-timer,
if
you decide
not to use it, you simply have to
return
the
le
ve
r to its original position, and the
se
lf-
timer will be disconnected.
The
,self-timer may
be used very conveniently in place
of
a cable
release.
It
will release the
shutter
without any
vibration.
33
To Next Page
Loading...
Need help?
General
