4
2. System Requirements
Your computer must meet the following requirements to run Manual Navigation Software.
[PC] PC/AT compatible
[CPU] Core2 Duo 1.66 GHz or faster (Core2 Duo 1.86 GHz or faster recommended)
Pentium D 1.7 GHz or faster (Pentium D 3.0 GHz or faster recommended)
Pentium M 1.7 GHz or faster (Pentium M 2.0 GHz or faster recommended)
Pentium 4 2.4 GHz or faster (Pentium 4 2.8 GHz or faster recommended)
* Core2 Duo or faster processor is required to run Manual Navigation Software on Windows Vista or later.
[RAM] Windows Vista or later: 1 GB minimum (2 GB or more recommended)
Windows XP: 512 MB minimum (1 GB or more recommended)
[HDD space] 1 GB minimum (available space)
* Windows Vista or later: Available space in the drive that has the Document folder
* Windows XP: Available space in the drive that has the My Document folder
[Resolution] SVGA 800 × 600 or greater
[OS] Windows8/Pro/Enterprise (Pro recommended)
Windows7 Ultimate/Enterprise/Professional/Home Premium Service Pack1 (Professional recommended)
Windows Vista Ultimate/Business/Home Basic Service Pack1 (Business version recommended)
Windows XP Professional/Home Edition Service Pack2 or Service Pack3 (Professional version recommended)
[Required software] Windows8: Adobe Reader 11.0.2 or later (Windows Reader, installed by default in Windows8, cannot be used.)
Windows7: Adobe Reader 10.1.0 or later
Windows XP and Windows Vista: Adobe Reader 8.1.3 or later
* Software to view PDF files
Windows, Windows XP, Windows Vista, Windows7 and Windows8 are registered trade marks of Microsoft Corporation.
Adobe Reader and Adobe Acrobat are registered trademarks of Adobe Systems Incorporated.
Core2 Duo and Pentium are registered trademarks of Intel Corporation.
3. Component names and supplied parts
The following parts are included in the box.
WARNING
The CD-ROM that is supplied with the unit can only be played on a CD-drive or a DVD-drive. Do not attempt to play
this CD-ROM on an audio CD player as this may damage your ears and/or speakers.
*4 The front cover (*1) is already installed on the top case (*2) at factory
shipment.
*5 Remote controller cable is not included.
Parts name Qty. Appearance
Remote controller (front cover) 1 Right figure *1
Remote controller (top case) 1 Right figure *2
Remote controller (bottom case) 1 Right figure *3
Roundhead cross slot screws M4×30 2
Wood screw 4.1×16
(for direct wall installation)
2
Installation Manual (this manual) 1
Simple Operation Manual 1
CD-ROM
(Instruction Book and Installation Manual)
1
To Next Page
Loading...
Need help?
General
