Illuminates during 3D AUTO operation
TIMER light (yellow)
•
•
ON
OFF
1.5 sec.
0.5 sec.
3 sec.
1 sec.
ON
OFF
Unit ON/OFF button
This button can be used for turning on/off the unit when
remote controller is not available.
Remote controller signal receiver
RUN (HOT KEEP) light (green/blue)
Illuminates during operation.
green : except ECONO operation
blue : ECONO operation
Blinks when airflow stops due to the ‘HOT
KEEP’ and ‘CLEAN operation’.
HOT KEEP
CLEAN operation
Illuminates during TIMER operation.
3D AUTO light (green)
HI POWER light (green)
Illuminates during HIGH POWER operation.