EN-11
OPERATION MODE select button
Each time the button is pressed, the
mode changes.
Page 12,14
x The above illustration shows all controls, but in
practice only the relevant parts are shown.
ON/OFF (luminous) button
Press to start operation, press again
to stop.
TEMPERATURE button
This button sets the room temperature.
AIR FLOW (UP/DOWN) button
This button changes the air À ow (up/
down) direction.
Page 15
TIME SET UP switch
This switch is for setting the time.
Page 12
SLEEP button
This button selects SLEEP operation.
Page 16
Display in OFF status
The current time, day of the week, and present OPERATING MODE are displayed while the air-conditioner is turned off.
MENU switch
This switch selects SELF CLEAN
operation and PRESET operation.
Page 25
ON-TIMER button
This button selects ON-TIMER operation.
Page 17
TIMER button
This button is used for setting the current
time and timer function.
ACL switch
Switch for resetting microcomputer.
Page 9
PROGRAM button
This button sets WEEKLY TIMER.
Page 19
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
Page 23
SILENT button
This button changes the SILENT
operation.
Page 24
OFF-TIMER button
This button selects OFF-TIMER
operation.
Page 16
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
Page 19
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
Page 13
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
Page 24
SET/Child Lock button
Use this button to set the timer and
Child Lock.
Page 10
CANCEL button
This button cancels the ON-TIMER,
OFF-TIMER, and SLEEP operation.
Transmission section
[View with the cover opened]
Operation and display section for remote control
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit, a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
RFB012A009F_EN.indd 11 4/25/2020 9:30:13 PM
To Next Page
Loading...
Need help?
General
