8
AUDIO SYSTEM
NOTE: Please refer to Comfort Controls in your Owner’s Manual for
more detailed information on how to use your audio system.
Audio Remote
Control Switch
(if equipped)
VOLUME
UP
DOWN
SEEK
Change station
or track
MODE
Change the
audio source
C
D
B
A
To enter frequencies into the memory (AM/FM/SAT)
1. Press A to turn on the audio system.
2. Press B to select the desired band (AM/FM/SAT).
3. Press C to Seek Station
4. Hold down one of the Memory select buttons D (1-6) until it
beeps in order to save that station to memory.
1. Park your vehicle in a safe place and turn the ignition to the LOCK
position.
2. Connect the cable
(cable is not included with the vehicle) to the USB
memory device
or the Dock connector
to the iPod
.
3. Open the glove box
and connect the cable
to the USB input
terminal
.
4. Turn the ignition switch to the “ACC” position. Turn on the audio
system.
5. Press B several times to switch to the USB mode. The input mode
changes as follows:
CD
USB
Bluetooth
®
(if equipped)
6. Depending on your USB device, it may take longer for playback to start.
7. Once the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5. Press MENU on the touch screen.
6. Touch USB.
7. Touch <Folder> then select a track and begin playback.
USB and iPod Input (if equipped)
To Next Page
Loading...
Need help?
General
