Mitsubishi Lancer Evolution User Manual

1. Insert a straight blade (or minus) screwdriver
with a cloth over its tip into the notch of the
lamp assembly. Gently pry to remove the lens.
2. While
holding down the tab (A), pull out the
bulb.
3. To
install the bulb, perform the removal
steps in reverse.
NOTE
l
When
mounting the lens, align the tab (B) to
the hole on the vehicle body.
Rear room lamp*
E01004700537
When replacing the bulb, put the rear room lamp
switch into the “OFF” position.
1. Insert
a straight blade (or minus) screwdriver
with a cloth over its tip into the notch of the
lamp assembly and pry gently to remove the
lens.
2. While holding down the tab (A), pull out the
bulb.
3. To
install the bulb, perform the removal
steps in reverse.
NOTE
l
When mounting the lens, align the tabs (B)
with the holes on the vehicle body.
Maintenance
8-28
8
OGEE12E1

Mitsubishi Lancer Evolution Specifications

General

Brand	Mitsubishi
Model	Lancer Evolution
Category	Automobile
Language	English