4
CONTROLS
Regular Headlights Automatic Headlights (if equipped)
Headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license plate
and instrument panel lights on.
Headlights and other lights turn on and off automatically
in accordance with outside light level.
All lights off
AUTO
OFF
Fog Lights (if equipped)
Fog Lights will illuminate only
when headlights are on low beam.
Turning the knob in the direction
of the ON position turns on the
fog lights. Turning the knob in the
direction of the OFF position turns
off the fog lights. The knob will
return to the neutral position when
released.
High/Low Beam Switch
To change the headlights from high
beam to low beam and vice versa,
pull the turn signal lever fully towards
you (1). An illuminated blue light in
the instrument cluster indicates when
the headlights are on high beam.
Headlight flasher – You can flash the
high beams by pulling the lever gently
towards you (2).
Telescopic Steering
Telescopic Steering Wheel - located on
the underside of the steering column is
a lever that unlocks the steering column
and allows adjustment of the height and
distance of the steering wheel to the driver.
When adjustments* are complete, push the
lever back to its original position to lock the
steering wheel in place.
*Adjust the steering wheel only when the vehicle is at a
complete stop.
LOCK
UNLOCK
The sunshade can be operated with the ignition switch or the
operation mode in ON.
A - Pull the switch in the arrow direction to open the sunshade.
Pulling the switch all the way automatically opens the sunshade
completely.
B - Push the switch in the arrow direction to close the sunshade.
Pulling the switch all the way automatically closes the sunshade
completely.
C - Push the switch to stop the moving sunshade. If an object
obstructs the sunshade from closing the safety mechanism will
cause the sunshade to re-open automatically. The opened sunshade will become operational
again after a few seconds.
• Thesunshadeilluminationturnsonwiththeignitionswitchorwhentheoperationmodeisin
ON or ACC.
• Push the switch to change brightness of the sunshade illumination. The brightness switches
in sequence from High → Middle → Low → Off → High.
Sunshade (if equipped)
B
C
A
To Next Page
Loading...
Need help?
General
