7
Multi-information Meter Switch (INFO Button)
To lock or unlock the doors while
carrying the F.A.S.T.-key, press the
driver’s or front passenger’s door
lock/unlock switch A .
The Free-hand Advanced Security Transmitter (F.A.S.T.-key) enables
the engine to be started and the operation mode to be changed
simply by carrying it.
Change display information
by pushing the info button.
Warnings, odometer/tripmeter,
service reminder, engine coolant
temperature, average and momentary
fuel consumption, driving range and
average speed, etc.
A
Tire Pressure Monitoring System (TPMS)
The Tire Pressure Monitoring System light illuminates when one or more
of your tires is significantly underinflated. Please note that changes in
the outside temperature may decrease tire pressure causing the TPMS
light to turn on. If the TPMS light remains illuminated, check your tire
pressure.
Warning light
illuminates when tire
pressure is too low.
If warning light illuminates, contact
your Mitsubishi dealer.
(May be a TPMS system issue
or malfunction.)
Keyless Entry System
[F.A.S.T.-key] [Normal Key]
1. LOCK ( ) button
Press: Once – Lock all doors
2. UNLOCK (
) button
Press: Once – Unlock driver door
Twice – Unlock all doors
3. PANIC
Press and hold to sound alarm.
Press any button to turn off panic
alarm.
TECHNOLOGY
Engine Switch (if equipped)
Starting the Engine
Stopping the Engine
1. Stop the vehicle.
2. Fully engage the parking brake while depressing the brake pedal.
3. Move the selector lever to the “P” (Park) position and then press
the engine switch to stop the engine.
1. Make sure the parking brake is applied.
2. Press and hold the brake pedal down with
your right foot.
3. Make sure the drive selector lever is in the
“P” (Park) position.
4. Press the engine switch.
To Next Page
Loading...
Need help?
General
