GENERAL -
Vehicle Identification
00-21
THEFT PROTECTION<R.H.D.>
In order to protect against theft, a Vehicle Identification Number
(VIN) is attached as a plate or label to the following major
parts of the main outer panels:
Fender, Doors, Back door, Quarter panel, Hood, Bumpers
In addition, a theft-protection label is attached to replacement
parts for the body outer panel main components.
Cautions regarding panel repairs:
1. When repainting original parts, do so after first mask-
ing the theft-protection label, and, after painting, be
sure to peel off the masking tape.
2. The theft-protection label for replacement parts is cov-
ered by masking tape, so such parts can be painted
as is. The masking tape should be removed after paint-
ing is finished.
3. The theft-protection label should not be removed from
original parts or replacement parts.
LOCATIONS
TARGET AREA (A: FOR ORIGINAL EQUIPMENT PARTS, B: FOR REPLACEMENT PARTS)
A
B
The illustration indicates left outer side. Right side is
symmetrically opposite.
Fender
B
A
Quarter panel
The illustration indicates left outer side. Right side is
symmetrically opposite.
A
B
Front door
The illustration indicates right outer side.
Left side is symmetrically opposite.
A
B
Rear door
The illustration indicates right outer side.
Left side is symmetrically opposite.
[FOR REPLACEMENT PARTS]
[FOR ORIGINAL PARTS]
FOR MAIN OUTER PANELS
THEFT PROTECTION LABEL
To Next Page
Loading...
Need help?
General
