Assembly instructions BA-100155
Control unit MonTurn
9
1.5 Limited liability
All information and instructions in this manual have been compiled with the valid standards and regulations, the
state-of-the-art and our many years of experience and expertise.
Montech AG will not assume liability for damage resulting from:
– Not following the instructions in this manual.
– Using the machine for purposes other than its intended use.
– Use of personnel that has not been trained.
1.6 Copyright
Treat the assembly instructions confidentially. They are meant exclusively for persons working on the equipment.
Making the operating manual available to a third party without the Montech AG’s written permission is
prohibited.
NOTE!
The content information, texts, drawings, pictures and other illustrations are protected by
copyright. Any use of them beyond this purpose without the Montech AG’s written
permission is prohibited.
1.7 Warranty terms and conditions
The warranty terms and conditions can be found in the Montech AG’s General Terms and Conditions (GTC).
1.8 Customer service
Our customer service will provide technical information.
Information on the contact person responsible can be obtained by phone, fax, e-mail or on the Internet; please
refer to the manufacturer’s address on the installation declaration page.
To Next Page
Loading...
Need help?
General
