Assembly instructions BA-100155
Control unit MonTurn
10
2 Transport, Packaging and Storage
2.1 Unauthorized or improper transport
CAUTION!
Damage may result from unauthorized or improper transport!
Moving the machine by untrained personnel may result in considerable property damage.
– Only use trained personnel to unload the machine upon delivery and for in-house
transport.
– Do not step under suspended loads.
– Means of transport must be used properly.
– Always place the MonTurn on a level surface.
2.2 Transport inspection
Upon delivery, check the shipment immediately for completeness and transport damage.
In case of visible transport damage, proceed as follows:
– Do not accept the shipment or accept it conditionally only.
– Record the extent of the damage on the shipping documentation or the freight forwarder’s shipping
note.
– Initiate a complaint.
NOTE!
Complain about any defect immediately upon detection.
Claims for damages may only be made within the complaint periods.
2.3 Packaging
The individual packages have been packed according to anticipated shipping conditions. Only environmentally
friendly materials were used for packaging.
The packaging will protect the individual components from shipping damage, corrosion and other damage until
they are installed. Consequently, do not destroy the packaging and only remove shortly before installation.
To Next Page
Loading...
Need help?
General
