14
EXPLORING YOUR SUBHARMONICON (Continued)
TUNING STEP 1
Step 1 is now selected, and the LED indicator located under
the STEP 1 knob will be lit. As you listen, rotate the STEP 1
knob to set a pitch for Step 1 of your sequence.
ADVANCING TO STEP 2
Press the NEXT button to advance to Step 2
of the sequence. The LED indicator located
under the STEP 2 knob will be lit. As you
listen, rotate the STEP 2 knob to set a pitch
for Step 2 of your sequence.
ADVANCING TO STEP 3
Press the NEXT button to advance to Step 3
of the sequence. The LED indicator located
under the STEP 3 knob will be lit. As you
listen, rotate the STEP 3 knob to set a pitch
for Step 3 of your sequence.
ADVANCING TO STEP 4
Press the NEXT button to advance to
Step 4 of the sequence. The LED indicator
located under the STEP 4 knob will be lit.
As you listen, rotate the STEP 4 knob to set
a pitch for Step 4 of your sequence.
NOTE: You can use the NEXT button to
continually cycle through the steps, so you
can change the STEP knob values until you
have a pattern you like.
CREATING A SEQUENCE (Continued)
14
To Next Page
Loading...
Need help?
General
