17
User Interface.
1. Internal Battery Level
Indicates the charge level of the internal battery.
2. Error LED
Illuminates Red if reverse polarity is detected, or blinks
“On” and “Off” when the internal battery temperature is
too high.
3. Power Button
Push to turn unit “On” & “Off”.
4. Power LED
Illunimates White when unit is “On”.
5. Jump Starting LED
Illuminates White when the jump starter is active. If the unit
is connected properly to a battery, the jump starter will
automatically detect a battery and go into jump starting
mode (LED flashes White when Manual Overide feature is
active).
6. Manual Override Button
To enable, push and hold for three (3) seconds.
WARNING: Disables safety protection and manually
forces the jump starter “On”. Only for use when a
battery is too low to be detected.
7. Light Mode Button
Toggles the ultra-bright LED light through 7 light modes:
100% > 50% > 10% > SOS > Blink > Strobe > Off
USER INTERFACE
model no. 011-1906-4 contact us 1.888.942.6686
To Next Page
Need help?
General
