6881096C77-O September 26, 2003
Introduction: Control Heads 1-7
Table 1-2. 12-Button Keypad (W7 and W9)
Key Description
#1 key
Site (STE)
Forces the radio to scan for a new site when the automatic multiple-site select
(AMSS) feature for wide-area coverage is in use.
#2 Key
Page (2 or 2Pge)
Initiates a Call Alert page or enters Call ID list programming.
#3 key
Lock (Lck)
Locks the radio onto the current site when the AMSS feature is in use.
#4 key
Status (Sts)
Used alone or in conjunction with other keypad buttons and the Sel button to
send a status transmission, indicating a predetermined condition change.
#5 key
Regroup (Rpg)
Requests a change in the radio’s talkgroup assignment when the dynamic
regrouping feature is used.
#6 key
Message (Msg)
Used alone or in conjunction with other keypad buttons and the Sel button to
transmit a message, indicating a response or temporary condition.
#7 key
Horn/Lights (H/L)
Selects/enables radio external alarms.
#8 key
Monitor (Mon)
Monitors the radio for channel traffic.
#9 key
Direct/Simplex (Dir)
Used for talkaround (mobile-to-mobile) conversations.
* key
Recall (Rcl)
Reviews modes in scan and phone lists.
# key
Delete (Del)
Used when editing stored lists.
To Next Page
Loading...
Need help?
General