13
10.3 Making intercom calls
If more than one handset is registered to the base, an internal call can be
made between handsets.
1. If 2 handsets are registered to the base, press and hold u and the
other handset rings automatically.
2. If 2 or more handsets are registered to the base, press and hold u and
scroll
d
to select the handset to be called, press
Select
.
10.4 Answering calls
When you receive a call, the phone rings and the phone number (or name
if stored in the contacts list) is displayed.
1. Press t to answer the call.
2. Press t again to switch to hands-free.
Note
If you prefer for the call to be automatically answered when you lift the
handset o the charger cradle, you will need to switch Auto answer on,
please refer to the full User Guide Call settings section.
10.5 Ending a call
Press e, or place the handset back on the charger cradle.
Note
You can end calls simply by placing the handset on the charger cradle.
To turn this feature o, please refer to the full User Guide Call settings
section.
11. Call blocking
You must subscribe to your network provider’s caller ID service for this
feature to work. Charges may apply.
You can add numbers to the call blocking list as they come through or by
using the Call Blocking menu on the hellovoice app.
A maximum of 1000 numbers can be added to the call blocking list.
11.1 Block an unknown caller
You can block an incoming landline call from an unknown caller, i.e. a
number that is not in your contacts list.
1. When the handset is ringing, press
Block
.
2. The handset will be silenced and
Added to Call Blocking
will be displayed.
The incoming call screen will continue to display until the call times
out or the caller hangs up.
Note
When you receive a call from a blocked number, the ringer will be
silenced.
Blocked
will be displayed followed by the caller’s number. The
incoming call screen will continue to display until the call times out or the
caller hangs up.
To Next Page
Loading...
Need help?
General
