English
2
Power it
Install batteries
1 Turn the keyboard over and remove the battery cover.
2 Insert 2 “AA” batteries and replace cover.
Note: To save battery life, turn off keyboard when not in use.
Turn it on & off
Press and hold .
The status light
flashes three times. The keyboard searches and
connects to the previously connected Bluetooth device. If it can’t find this
device, the status light turns steadily lit (solid) to indicate pairing mode.
Pair & connect
Your keyboard pairs with any device that supports the Bluetooth HID profile.
However, some functions may not be supported.
1 Turn off any Bluetooth devices previously paired with your keyboard.
2 Turn on the Bluetooth feature on your Motorola Android device.
3 Turn on your keyboard (press and hold
).
The status light
flashes slowly 3 times then becomes steadily lit.
Note: If you are prompted for a passkey on your Android device, enter 0000.
When connected, the status light
flashes 5 times, slowly pulses for 30
seconds then turns off.