Feature Summary Chart
43
Note: To enter Advanced Configuration Mode, press and hold both PTT and MON
simultaneously for 3-5. Short press Menu to get to the different programming options.
Reset to Factory
Defaults (2)
Yes N/A Enabled Allows to restore
radio's factory
defaults. Press PTT,
Menu
simultaneously for 3
seconds while
turning ON radio.
Reverse Burst Yes Yes 180 Reverse Burst
eliminates unwanted
noise (squelch tail)
during loss of carrier
detection. Press
PTT, Call Button
simultaneously while
turning ON radio to
toggle between 180
or 240 or use CPS to
select values 180 or
240.
Scan Yes Yes MON Button Short press MON
button to enable/
disable scan. One
channel radio does
not support scan.
Features Programmable
via Advanced
Configuration
Programmable
via CPS
Default Programming Tips
6864110W15_.book Page 43 Wednesday, April 26, 2023 2:56 PM
To Next Page
Loading...
Need help?
General
