7 CONNECTING YOUR DCH RECEIVER
25
Connecting Your DCH Receiver to a Stereo TV (SDTV)
Depending on the TV’s inputs:
1. If possible, use the S-Video and audio connectors on the DCH receiver.
2. If the TV has no S-Video input, use the composite video and audio connectors on
the DCH receiver.
3. If the TV has an RF input only, use the RF out connector on the DCH receiver.
The RF connection carries video and audio.
Connecting a Stereo TV (SDTV)
1. Connect the stereo audio cable to the AUDIO L and R connectors on the DCH
receiver and the
AUDIO LEFT and AUDIO RIGHT connectors on the Stereo TV (SDTV).
2. Connect a video cable to the
VIDEO OUT connector on the DCH receiver and the
INPUT VIDEO on the TV or an S-video cable to the S-VIDEO connectors on the
DCH receiver and the TV.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your DCH Receiver to an HDTV — Video Only on page . 19
To Next Page
Loading...
Need help?
General
