24 Procedure for Resetting the Camera
6. Procedure for Resetting the Camera
Note: If your Camera is moved from one router (e.g. home) to another (e.g.
office) or you have Camera setup issues, then the Camera must be reset. Please
reset the Camera with the following procedures:
1. Slide the ON/OFF switch to OFF.
2. Press and hold the PAIR button, then slide the ON/OFF switch to ON.
3. Release the PAIR button when you hear a confirmation beep and wait for
the Camera to complete an internal reset procedure. The LED indicator
will turn red and flashes slowly when the Camera is reset successfully.
4. You can add your Camera again by following the steps in section 3.2.4 for
Android devices or in section 3.3.4 for iOS devices.
To Next Page
Loading...
Need help?
General
