Parent Unit display icons
Connection status
- displays when a strong signal strength is detected between the
baby unit and the parent unit.
- , or displays when a moderate signal strength is detected
between the baby unit and the parent unit.
- displays when the link between the baby unit and the parent unit
is lost.
- displays when the parent unit is searching for a baby unit.
Current view status
- Displays the number of which baby unit is being viewed.
Zoom
- Displays when the camera on the baby unit has zoomed in.
Volume off
- Displays when the volume is turned off.
Sound activation
- You can turn on or off the sound activation feature to check on your
baby whenever there is sound in the baby's room.
- Displays when sound activation is on. When the baby unit detects a
sound in the baby's room, the video image of the baby will be
displayed on the parent unit.
Battery status
-
scrolls when the battery is charging.
-
displays when the battery is fully charged.
-
displays when the battery is low and needs charging.
-
displays when you do not have a battery installed but operates
using AC power, or the battery has been installed incorrectly.
Camera selection
- You can select the screen to view images from a particular baby unit,
or view all baby units in Scan Mode.
Brightness
- You can change the brightness of the screen.
Sensitivity
- You can change the sound sensitivity level of the baby unit. It monitors
the baby unit on picking up any sound activities in your baby's room.
Pairing
- The system comes with baby unit(s) already paired with the parent unit.
To Next Page
Loading...
Need help?
General
