Getting Started 11
ENGLISH
2.2 Installing the battery and connecting Parent Unit to
power
A rechargeable battery pack is supplied and should be fitted, so that the Parent
Unit can be moved without losing the link from the Baby Unit(s). Charge the
Parent Unit before you use it for the first time or when the Parent Unit indicates
that the battery is low.
1. Unclip and remove the battery compartment cover
2. Insert the plug of the battery pack into the jack inside the battery
compartment, and fit the battery pack into the compartment.
3. Replace the battery compartment cover, and pull out the stand (refer to
section 2.3).
4. Insert the DC plug of the power adapter into the DC jack in the side of the
Parent Unit.
RED
BLACK
To Next Page
Loading...
Need help?
General
