6
Configuration Manager
You may not need to use the MT8733’s Configuration Manager. Here are
some reasons for using it:
• You want to change the wireless network name and password. For instance,
maybe you want a more easily remembered name, or you're replacing a router
and want to use your existing WiFi Network Name (SSID) and/or WiFi
Password/Key instead of the unique ones that come with the MT8733. You
can use the same SSID and Password for both 5G and 2.4G. When
connecting to WiFi, the MT8733 will connect using the best band available.
• You want to set up special Internet gaming settings.
• You want to get performance information about the MT8733 modem and/or
built-in router. This can be helpful in diagnosing DOCSIS performance issues
and/or optimizing wireless performance.
If you need to access the MT8733 Configuration Manager, open your Web
browser. Type http://192.168.0.1 in the address bar and then press the Enter
key.
In the login dialog box type the following User Name and Password in lower
case, then click OK.
User Name: admin
Password: Type the unique password printed on your device’s
bottom label in the Password field.
The Basic Status and Settings page will appear. If this page doesn’t appear,
please see the Troubleshooting Tips below.
For more detailed information about the MT8733 and its Configuration
Manager, please see www.motorolanetwork.com/MT8733manual
To Next Page
Loading...
Need help?
General