Motorola O2 Quick Start Guide

4
2. Getting started
A. Connecting the base
1. Plug the telephone line cord into the socket marked l on the underside of
the base and the other end of the line cord into the telephone line wall jack.
2. Plug the AC power jack into the socket marked
P on the underside of the
base and plug the AC adaptor into the AC power outlet. The green Power/In
use light comes on and you will hear a confirmation tone.
B. Installing and charging the handset
1. Plug the AC power jack into the socket marked P on the underside of the
charger cradle and plug the AC adaptor into the AC power outlet.
2. The 750mAh Ni-MH battery pack is pre-installed. If you are charging the
batteries for the first time, place the handset on the charger cradle to
charge for at least 16 hours continuously.
3. When the handset is fully charged,
icon will appear steady on the
display. The display will show the time and handset number (e.g. 2) to
indicate that it is registered to the base.
Important
Warning! Use only the approved rechargeable Ni-MH battery pack (750mAh
Ni-MH rechargeable battery pack) supplied with your O2.

Motorola O2 Specifications

General

Brand	Motorola
Model	O2
Category	Cordless Telephone
Language	English