24
FRONT PANEL
PROGRAMMING MODE
English
FRONT PANEL PROGRAMMING
MODE
This mode allows you to change the feature parameters to
enhance the use of your radio.
Note: This feature is only supported by certain models.
Entering Front Panel Programming Mode
If your radio is turned ON, turn it OFF. Press and hold the side
programmable button 1, and turn your radio ON. A tone is
heard, indicating that your radio is in Programming Mode. The
indicator illuminates and the “BCKLIGHT” is displayed on
the radio LCD screen.
Exiting Front Panel Programming Mode
Turn the radio OFF to exit Programming Mode.
Assessing Front Panel Programming Mode
Parameters
To Navigate
Press the or to scroll through the parameters for
each menu or sub-menu item.
To Select Settings
Press the PTT button to select menu or sub-menu item.
To Exit Selection Without Changes or To Return
To Previous Menu Level
Press side programmable button 1 to return to previous menu
level or to exit the selection parameter without change.
To Next Page
Loading...
Need help?
General
