English
6 If the Call Alert acknowledgement is received,
a tone sounds and the display shows Call
Alert Successful.
OR
If the Call Alert acknowledgement is not
received, a tone sounds and the display
shows Call Alert Failed.
Sending a Quick Text Message
Press the preprogrammed Text Messaging
button and proceed to step 3.
OR
Press the preprogrammed One Touch Call
button to send a predefined Quick Text message
to a predefined alias or ID and proceed to step 6.
OR
Follow the procedure below.
1 to access the menu.
2 or to Messages and press to
select.
3 or to Quick Text and press to
select.
4 or to the required Quick Text and
press to select.
5 or to the required alias or ID and
press to select.
6 The display shows Text Message: <Group/
Subscriber Alias or ID>.
7 If the message is sent successfully, a tone
sounds and the display shows Message
Sent.
OR
If the message cannot be sent, the display
shows Message Sent Failed.
Replying to a Text Message with
Quick Text from the Inbox
Press the preprogrammed Text Messaging
button and proceed to step 3.
OR
Follow the procedure below.
1 to access the menu.
2 or to Messages and press to
select.
3 or to Inbox. Press to select.
4 or to the required message and
press to select.
5 Press once more to access the sub-
menu.
6 or to Reply and press to select.
7 or to Quick Text and press to
select.
8 Press once more to send the reply.
9 The display shows Text Message: <Group/
Subscriber Alias or ID>.
10 If the message is sent successfully, a tone
sounds. The display shows Message Sent.
OR
If the message cannot be sent, the display
shows Message Sent Failed.
Sending an Emergency Alarm
1 Press the preprogrammed Emergency
button or the Emergency footswitch.
2 The display shows Sending Alarm, which
alternates with your radio ID. The green LED
lights up and the Emergency icon appears on
the Home screen display.
3 When an Emergency Alarm acknowledgment
is received, the Emergency tone sounds and
the green LED blinks. The display shows
Emergency Alarm Successful.
OR
If your radio does not receive an Emergency
Alarm acknowledgement, and after all retries
have been exhausted, a tone sounds and the
display shows Emergency Alarm Failed.
4 Radio exits the Emergency Alarm mode and
returns to the Home screen.
NAG-LACR-EMEA.book Page 64 Friday, April 27, 2007 6:58 PM