MrCool DIY E Star Series Troubleshooting Guide

Troubleshooting 8
4. Information Inquiry
• To enter information inquiry status, complete the following procedure within ten seconds:
• Press LED (or DO NOT DISTURB) 3 times.
• Press SWING (or AIR DIRECTION) 3 times.
• Finish 1 and 2 within 10 seconds, you will hear beeps for two seconds, which means the unit goes into parameter
checking mode.
• Use the LED (or DO NOT DISTURB) and SWING (or AIR DIRECTION) buttons to cycle through information displayed.
• Pressing LED (or DO NOT DISTURB) will display the next code in the sequence. Pressing SWING (or AIR
DIRECTION) will show the previous.
• The following table shows information codes. The screen will display this code for two seconds, then the information
for 25 seconds.

MrCool DIY E Star Series Specifications

General

Brand	MrCool
Model	DIY E Star Series
Category	Air Conditioner
Language	English