MSI 865PE/G Neo2-P MS-6728 User Manual

3-20
MS-6728 ATX Mainboard
Init. Graphics Adapter Priority
This setting specifies which VGA card is your primary graphics adapter. Setting
options are:
Internal VGA The system initializes the onboard VGA device.
(For 865G)
AGP/Int-VGA The system initializes the installed AGP card first.
If an AGP card is not available, it will initialize the
onboard VGA device. (For 865G)
AGP/PCI The system initializes the installed AGP card
first. If an AGP card is not available, it will initial-
ize the PCI VGA card.
PCI/AGP The system initializes the installed PCI VGA card
first. If a PCI VGA card is not available, it will
initialize the AGP card.
PCI/Int-VGA The system initializes the installed PCI VGA card
first. If a PCI VGA card is not available, it will
initialize the onboard VGA device. (For 865G)
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Setting options: Disabled, Enabled.
PCI Slot1 IRQ Priority, PCI Slot2/5 IRQ Priority, PCI Slot3 IRQ Priority,
PCI Slot4 IRQ Priority
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7, 9,
10, 11, Auto. Selecting Auto allows BIOS to automatically determine the IRQ
line for each PCI slot.
Set IRQs to PCI or ISA
Press <Enter> to enter the sub-menu and the following screen appears:

MSI 865PE/G Neo2-P MS-6728 Specifications

General

Brand	MSI
Model	865PE/G Neo2-P MS-6728
Category	Motherboard
Language	English